keyboard_arrow_right

Cfl 4pin socket

E-Simpo 4Pin Light Socket Adapter, Gx24q to E26/E27 Lamp Base Converter. Need Rewire to Bypass Ballast. (4-Pack)

Buy cfl 4pin socket
Check Price on Amazon
Buy cfl 4pin socket from Amazon.com

Description:

E-Simpo 4pcs Gx24q to E26/E27 Lamp Base Converter, Gx24 Short 4Pin to Medium Edison Socket Adapter - Ballast Incompatible(Rewiring/Remove/Bypass Required) (G(x)24q to E26/E27, 15.5mm 4P)

Features:

- 4pcs/lot sample pack, there are 6pcs/pack, 15pcs/pack, 60pcs/pack avalible in our store.
- Gx24q to E26 Lamp base adapter:
Maleside:Gx24q Short 4-Pin Lamp Base
Female Side: E26/E27 Medium Screw Lamp Holder
-
Works for 4-Pin CFL with

G24q-1: 10w 13w Quad Tube
GX24q-1: 10w 13w Triple Tube
G24q-2: 18w Quad Tube
GX24q-2: 18w Triple Tube
G24q-3: 26W 32w Quad Tube
- Material: High temperature resistant, anti-burning PBT and anti-aging
- All Voltage Workable: 110V, 120V, 130V, 220V, 240V, 260V

Note:

1. Please distinguish carefully the pin base types: there are G24, 2P 4P, and G23, Gx23 etc. Check your old CFL lamp base so to confirm the existing fixture is G24q or Gx24q socket.
2. No Ballast is Required. Please be sure to remove or bypass the ballast from your existing CFL fixture before the installation of these converters. These converters will not work properly when using the ballast at the fixture. Most importantly, using the BALLAST will cause the LED bulbs to flicker or even destroy immediately.

How to remove/bypass the ballast?
1. Turn Off the Power.
2. Find the Ballast. Usually it is embeded inside the ceiling fixture. Please pull off the existing PL lamps, reflector. Leave wiring in junction box. and find the ballast.
3. Normally, the Ballast has a black and white wire on the input side (AC input side, 100V -120V for North America). It also has two red and two blue output wires. To bypass this ballast, please cut all the Input and output wires, so total 6 wires cut.
4. Then, you can connect the two red wires to the black wire.
5. Next, connect the two blue wires to the white wire. Now the ballast is bypassed.

Buy cfl 4pin socket from Amazon.com
  • NOT FOR DIY!!! NEED REWIRING! Removing or Bypassing the ballast INSIDE the light fixture is REQUIRED. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE THE LED BULB WITH BALLAST IN THE FIXTURE. DOING SO WILL LIKELY DAMAGE THE BULB.
  • 4pcs/lot, with Base depth is 15.5mm/0.6 inches. Short version 4pins,Suitable for G24Q-1, G24Q-2.G24Q-3, GX24q-1,GX24q-2,GX24q-3 socket;
  • Physically Change the socket contact, twist into existing GX24Q socket and transform the fixture to fit any standard E26 E27 medium size bulb. BUT mostly GX24Q CFLs are with an electronic ballast inside, which will cause the LED bulb flickering, burnt, hot or smell, and damage the electrical parts inside the bulb.
  • 4P Conductive,E-Simpo's New Generation. PBT Housing,Copper Contact.
  • Suitable for All Voltage: 100-240V Works for 4-Pin CFL with G24q-1 Base:10w 13w Quad Tube; GX24q-1 Base:10w 13w Triple Tube;G24q-2 Base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube








Buy cfl 4pin socket from Amazon.com


E-Simpo 4Pin Light Socket Adapter, Gx24q to E26/E27 Lamp Base Converter. Need Rewire to Bypass Ballast. (2-Pack)

Buy cfl 4pin socket
Check Price on Amazon
Buy cfl 4pin socket from Amazon.com

Description:

2pcs E-Simpo Gx24q to E26/E27 Lamp Base Converter, Gx24 Short 4Pin to Medium Edison Socket Adapter - Ballast Incompatible(Rewiring/Remove/Bypass Required) (G(x)24q to E26/E27, 15.5mm 4P)

Features:

- 2pcs/lot sample pack, there are 6pcs/pack, 15pcs/pack, 60pcs/pack avalible in our store.
- Gx24q to E26 Lamp base adapter:
Maleside:Gx24q Short 4-Pin Lamp Base
Female Side: E26/E27 Medium Screw Lamp Holder
- Suitable for Gx24q G24q Lamps socket: LED, Halogen, CFL Light Bulb Converter

Works for 4-Pin CFL with

G24q-1 Base: 10w 13w Quad Tube
GX24q-1 Base: 10w 13w Triple Tube
G24q-2 Base: 18w Quad Tube
GX24q-2 Base: 18w Triple Tube
G24q-3 Base: 26W 32W
GX24q-3 Base: 26w 32w Triple Tube

Note:
1. Please distinguish carefully the pin base types: there are G24, 2P 4P, and G23, Gx23 etc. Check your old CFL lamp base so to confirm the existing fixture is G24q or Gx24q socket.
2. No Ballast is Required. Please be sure to remove or bypass the ballast from your existing CFL fixture before the installation of these converters. These converters will not work properly when using the ballast at the fixture. Most importantly, using the BALLAST will cause the LED bulbs to flicker or even destroy immediately.

How to remove/bypass the ballast?
1. Turn Off the Power.
2. Find the Ballast. Usually it is embeded inside the ceiling fixture. Please pull off the existing PL lamps, reflector. Leave wiring in junction box. and find the ballast.
3. Normally, the Ballast has a black and white wire on the input side (AC input side, 100V -120V for North America). It also has two red and two blue output wires. To bypass this ballast, please cut all the Input and output wires, so total 6 wires cut.
4. Then, you can connect the two red wires to the black wire.
5. Next, connect the two blue wires to the white wire.
ballast bypassed

Buy cfl 4pin socket from Amazon.com
  • 2pcs/lot, sample pack. with Base depth is 15.5mm/0.6 inches. Short version 4pins,Suitable for G24Q-1, G24Q-2.G24Q-3, GX24q-1,GX24q-2,GX24q-3 socket;
  • NOT FOR DIY!!! NEED REWIRING! Removing or Bypassing the ballast INSIDE the light fixture is REQUIRED. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE THE LED BULB WITH BALLAST IN THE FIXTURE. DOING SO WILL LIKELY DAMAGE THE BULB.
  • Physically Change the socket contact, twist into existing GX24Q socket and transform the fixture to fit any standard E26 E27 medium size bulb. BUT mostly GX24Q CFLs are with an electronic ballast inside, which will cause the LED bulb flickering, burnt, hot or smell, and damage the electrical parts inside the bulb.
  • 4P Conductive, E-Simpo's New Generation. PBT Housing,Copper Contact.Suitable for All Voltage: 100-240V,Works for 4-Pin CFL with G24q-1 Base:10w 13w Quad Tube; GX24q-1 Base:10w 13w Triple Tube;G24q-2 Base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube
  • There are some LED Driver who can be compatible with the ballast, no LED Driver can be compatible with all the ballast. So the best thing is bypass or remove once we want to change CFL to LED Lamp. When we remove pin-based CFL, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light will not work.






Buy cfl 4pin socket from Amazon.com


E-Simpo 4Pin Light Socket Adapter, Gx24q to E26/E27 Lamp Base Converter. Need Rewire to Bypass Ballast. (8-Pack)

Buy cfl 4pin socket
Check Price on Amazon
Buy cfl 4pin socket from Amazon.com

Description:



Works for 4-Pin CFL with

G24q-1 Base: 10w 13w Quad Tube
GX24q-1 Base: 10w 13w Triple Tube
G24q-2 Base: 18w Quad Tube
GX24q-2 Base: 18w Triple Tube
G24q-3 Base: 26W 32w Quad Tube
GX24q-3 Base: 26w 32w Triple Tube
Note:

1. Please distinguish carefully the pin base types: there are G24, 2P 4P, and G23, Gx23 etc. Check your old CFL lamp base so to confirm the existing fixture is G24q or Gx24q socket. If your socket is 2P, pls choose G24d-E27: https://www.amazon.com/dp/B017T1UJEE

2. How to bypass the ballast?
1. Turn Off the Power.
2. Find the Ballast. Usually it is embeded inside the ceiling fixture. Pls pull off the existing PL lamp, reflector. Leave wire in junction box. and find the ballast.
3. Normally, the Ballast has a black and white wire on the input side (AC input side, 100V -120V for North America). It also has two red and two blue output wires. To bypass this ballast, please cut all the Input and output wires, so total 6 wires cut.
4. Then, you can connect the two red wires to the black wire.
5. Next, connect the two blue wires to the white wire. now ballast is bypassed.

Buy cfl 4pin socket from Amazon.com
  • 8pcs/lot,G24q Series (Female Socket Fixture) to E26 (Male Bulb Base) Adapter-Q series has a shorter tip than D series and is more common in the US.
  • Some rewire work you need to do on the can: Need BYPASS OR REMOVE the ballast. If you have not remove or bypass ballast, it will damage the bulb or cause filckering.
  • Suite for all CFL pin gx24 base, compatible with 4 Pin G24Q-1,G24Q-2,G24Q-3, GX24Q-1, GX24Q-2, GX24Q-3(Please confirm what base you need before you buy)
  • Works for 4-Pin CFL with G24q-1 Base:10w 13w Quad Tube; GX24q-1 Base:10w 13w Triple Tube;G24q-2 Base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube
  • This adapter works with bulbs operating at 120-240 volts. Anti-burning PBT and anti-aging enable more safty in your life.





Buy cfl 4pin socket from Amazon.com


13W CFL Equal G24Q Base 3000 Kelvin LED Bulb For 4-Pin Sockets Req. Ballast Removal MaxLite 76609

Buy cfl 4pin socket
Check Price on Amazon
Buy cfl 4pin socket from Amazon.com

Description:

6 watt - 120/277 volt - 4-Pin (G24q) Base - 3,000K - Non-Dimmable - MaxLED - PL Retrofit Lamp - Ballast Bypass Maxlite LED Light Bulb

Buy cfl 4pin socket from Amazon.com
  • Color Temperature: 3,000K
  • Average Lifetime: 50000 hours
  • Lumens (light output): 500
  • CRI: 82
Buy cfl 4pin socket from Amazon.com


Satco Smooth Phenolic GU24 - 4-Pin CFL Socket - 801852

Buy cfl 4pin socket
Check Price on Amazon
Buy cfl 4pin socket from Amazon.com

Description:

13W G24q-1 and GX24q-1 277VAC, 60Hz, 0.15A, Height: 2", GU24 - Four Pin CFL - Electronic Self-Ballasted CFL Lampholder Less Cap

Buy cfl 4pin socket from Amazon.com


Leviton 26800-4A9 Twist-in Socket for G24q and GX24q Lamp Bases, 4-Pin, 120 W, 600 V, White

Buy cfl 4pin socket
Check Price on Amazon
Buy cfl 4pin socket from Amazon.com

Description:

Twist-Lock Compact Fluorescent Socket for Lamp Bases G 32W and 42W (Universal), Body Marked UL and CSA.

Buy cfl 4pin socket from Amazon.com
  • Allows cost-effective design of smaller, tighter luminaires with compact fluorescent lamps
  • Lighting fixtures for retail, commercial and industrial facilities
  • For use with universal wattage ballast only
  • Eliminates pulling and pushing during lamp insertion that can damage lamps or fixtures
  • Easy rotate and lock action speeds up assembly and relamping time
Buy cfl 4pin socket from Amazon.com


15-pack 4P Gx24q to E26 Lamp Base Converter,15.5mm G24Q to E26/e27, Gx24q to E26 Adapter,Lamp Holder Converter, Rohs,Need Bypass Ballast.

Buy cfl 4pin socket
Check Price on Amazon
Buy cfl 4pin socket from Amazon.com

Description:

15pcs Gx24q to E26 adapter, G24Q to E26/E27 Lamp base converter, Rohs. 4 pin led light bulb socket
- Gx24q to E26 Lamp base adapter:
- Suitable for G24Q-1,G24Q-2,G24Q-3, GX24Q-1, GX24Q-2, GX24Q-3 Lamps socket: LED,Halogen, CFL Light Base Converter
Works for 4-Pin CFL with

G24q-1: 10w 13w Quad Tube
GX24q-1: 10w 13w Triple Tube
G24q-2: 18w Quad Tube
GX24q-2: 18w Triple Tube
G24q-3: 26W 32w Quad Tube
GX24q-3: 26w 32w Triple Tube
- Voltage Workable: 85-265V AC
- Material: anti-burning PBT, Copper Contact

Note:
1. Please distinguish the pin base types: there are G24, 2P 4P, and G23, Gx23 etc. Check your old CFL lamp base so to confirm the existing fixture is G24q or Gx24q socket. If your socket is 2P, pls choose G24d-E27: https://www.amazon.com/dp/B017T1UJEE
2. No Ballast is Required. It is 100 that PL-C downlight fixture has ballast inside. Dismantle ballast before install the LED light, otherwise the ballast will make resonance high voltage which destroy the light, reviews like burnt, smell, hot, flicking are all results that not bypass the ballast correctly.
3. Even you are replacing with E26/E27 CFL, you need remove the ballast also. Otherwise, the CFL E26/e27 Lamp will not work on.

2. How to bypass the ballast?
1.Off the Power.
2. Find the Ballast. Usually it is embedded inside the ceiling fixture. Pls pull off the existing PL lamp, reflector. Leave wire in junction box,find the ballast.
3. Normally, the Ballast has a black and white wire on the input side (AC input side,100-120V for North America). It also has two red and two blue output wires. To bypass this ballast, please cut all the Input and output wires, so total 6 wires cut.
4.Then you can connect the two red wires to the black wire.
5.Next, connect the two blue wires to the white wire. now ballast is bypassed

Buy cfl 4pin socket from Amazon.com
  • This is 4P, NOT FOR 2P;Need BYPASS OR REMOVE the ballast, otherwise, it doesn't light on. G24q Series (Female Socket Fixture) to E26 (Male Bulb Base) Adapter - Q series has a shorter tip than D series and is more common in the US.
  • Suit for G24Q-1, G24Q-2.G24Q-3, GX24q-1,GX24q-2,GX24q-3 socket,Works for 4-Pin CFL with G24q-1 Base:10w 13w Quad Tube; GX24q-1 Base:10w 13w Triple Tube;G24q-2 Base:18w Quad Tube;GX24q-2 Base:18w Triple Tube;G24q-3 Base:26w 32w Quad Tube;GX24q-3 Base:26w 32w Triple Tube; If your socket is 2P, buy: https://www.amazon.com/dp/B017T1UJEE Physically change the contact.
  • THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE A LED BULB WITH A BALLAST IN THE FIXTURE, DOING SO WILL LIKELY DAMAGE THE BULB.
  • All pin-based CFL, like GX24Q G24d Gx24d GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the led lamp.
  • There are some LED Driver who can be compatible with the ballast, no LED Driver can be compatible with all the ballast. So the best thing is bypass or remove once we want to change CFL to LED Lamp. When we remove pin-based CFL, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light will not work.








Buy cfl 4pin socket from Amazon.com


Satco Smooth Phenolic GU24 - 4-Pin CFL Socket with Ring - 801857

Buy cfl 4pin socket
Check Price on Amazon
Buy cfl 4pin socket from Amazon.com

Description:

Satco - GU24 26W 4/PIN THRD W/RG ELECT

Buy cfl 4pin socket from Amazon.com
  • Sold on Amazon
Buy cfl 4pin socket from Amazon.com


Satco Smooth Phenolic GU24 - 4-Pin CFL Socket - 801847

Buy cfl 4pin socket
Check Price on Amazon
Buy cfl 4pin socket from Amazon.com

Description:

Satco - GU24 18W 4/PIN ELECTRONIC

Buy cfl 4pin socket from Amazon.com
  • Satco - GU24 18W 4/PIN ELECTRONIC
Buy cfl 4pin socket from Amazon.com


Satco Smooth Phenolic GU24 - 4-Pin CFL Socket with Ring - 801850

Buy cfl 4pin socket
Check Price on Amazon
Buy cfl 4pin socket from Amazon.com

Description:

Satco - GU24 18W 4/PIN THRD W/RG ELECT

Buy cfl 4pin socket from Amazon.com
  • Satco - GU24 18W 4/PIN THRD W/RG ELECT
Buy cfl 4pin socket from Amazon.com


Cfl 4pin socket