MBRP S5044AL Single Side Cat Back Exhaust System
Value Without Compromise: Installer Series from MBRP brings you the best of both worlds. Designed and constructed to the exact same specifications as MBRP's Pro Series you can expect the same improvements in torque and horsepower and the same awesome sound as MBRP's top of the line products. The difference is the heavy duty aluminized steel construction saves you money without compromising on performance. As aluminized goes MBRP's truly is superior to many other similar products on the market. Heavy sixteen gauge is one reason, another is that MBRP's systems have a thick protective coating of aluminum silica on the seams - an area that is often left exposed to rust. MBRP is so certain of MBRP's Installer Series products that MBRP back them with an industry leading 3 Year Warranty. Built to Perform: These days MBRP expects the vehicles to provide reliable, comfortable and efficient transportation. Your MBRP performance exhaust is designed to make sure that happens without fail. Its ability to accelerate the removal of hot contaminated exhaust gases results in a cooler better running engine. That means more torque, more horsepower, improved fuel mileage and reduces the risk of pre-mature breakdown or lubricant deterioration. The Premium Difference: In an industry with its share of "commodity" exhaust products MBRP stands apart as a manufacturer of truly quality performance exhaust systems. Through MBRP's in house customer service team as well as the professionals who distribute and install MBRP's products you can count on your MBRP experience to be an enjoyable one. Easy Installation: MBRP systems are as much fun to install as to drive with on your SUV. Bolt-on, no weld design makes installing this on your ride a no hassle one to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of vehicle you have.
- Mirror polished T304 stainless steel tip
- Delivers a rich, mellow exhaust note
- Installs with common hand tools
- Can improve fuel economy by 1-2 mpg
- Boosts torque and horsepower
Flowmaster 853072 Super 70 Series 3.00" Center In and Offset Out 16 Gauge 409S Stainless Steel Exhaust System
Flow master 853072 Super 70 Series 3. 00" Center In and Offset Out 16 Gauge 409S Stainless Steel Exhaust System
- Stock to mild exterior exhaust tone
- Minimal interior resonance
- Recommended for SUV, trucks, motorhomes and tow vehicles
- Improved horsepower/torque and potential mileage improvement
Gibson 65570 Stainless Steel Dual Extreme Exhaust System
For the enthusiast who wants to take their truck to the extreme and get an aggressive powerful sound and different look this Cat-Back Dual Exhaust System cat-back exhaust is for you. Dyno tested to give you improved acceleration, maximum passing and towing with increased horsepower. Will not fit with a fifth wheel trailer hitch.
- Exits Behind Rear Tire At An Aggressive Angle; Incl. Muffler/Pipes/Stainless Tips
- Superflow Performance T-304 Stainless Muffler, fully welded, Not packed or screened, nothing to blow out
- T-304 High Polished Stainless Steel Clampless Slash Tips
- Lifetime Limited Warranty
Dynomax 36474 Stainless Steel Universal Exhaust Tip
Manufactured and marketed by Tenneco Inc. (NYSE: TEN), DynoMax Performance Exhaust is a leading brand of dyno-proven exhaust products for muscle cars, pass cars, diesel and gas trucks, Jeeps and sport utility vehicles. DynoMax products engineered for Pure Unadulterated Power include complete cat-back and axle-back performance exhaust systems; performance mufflers and the industry exclusive VT valve technology muffler; and a large assortment of accessories and related exhaust products. Each DynoMax product features the benefits of worldwide global engineering resources. The DynoMax brand is backed by an aggressive marketing program, including a national events program; easy-to-use website and digital and printed catalog; in-depth technical and installation information and tech line; and advertising program.
- Universal: Inlet Diameter.: 3" - Outlet Diameter.: 4" - Overall Length: 12"
- Clamp on design
- 304 mirror polished stainless steel
- DynoMax embossed logo
- Stainless steel clamps included
- Tip Type : Single Wall ; Tip Style : Slant Cut
DNA MOTORING HDS-CA07-48-53L Racing Exhaust Header
The exhaust manifolds found in the 2006-2014 Chevrolet / gc pickups and subs were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 long tube off-road headers are designed to allow the exhaust gasses to flow more freely from each 4 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the 4.8l, 5.3l and 6.0l engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.
- Made of high quality t304 stainless steel for strength & durability
- Tag welded conk machine flange for precision & fitment
- Offers the best flow characteristics for the engine at high engine speeds
- Increase high flow air, instantly gain 10 -15 hip, / to
- Inlet: 2"(od, 8 ports) / outlet: 3"(od) / o2 sensor bung and metal gaskets included
Jones Exhaust Systems V413A Power Performance Muffler
V Power Series Muffler
- Offset In, Center Out
- 2.25" Inlet
- 2.25" Outlet
- 4" x 9.75" Oval Muffler
- 13" Muffler Length
Gibson 5610 Dual Exhaust System Kit
If you're looking for that awesome street truck look and want to keep the exhaust from affecting your tow trailer or vehicle, this dual cat-back exhaust is for you. Designed for hassle free, bolt-on installation with professional looking results while providing a powerful aggressive deep exhaust tone. Dyno tested to assure increased horsepower and produce more torque gains with no annoying noise inside the cab. Average horsepower gains are 10-15 and 15-20lb-ft of increase torque
- Exits Behind Rear Tire; Incl. Muffler/Pipes/Stainless Tips
- Superflow Performance Aluminized Muffler, fully welded, Not packed or screened, nothing to blow out
- T-304 High Polished Stainless Steel Clampless Slash tips
- Lifetime Limited Warranty
ECCPP Exhaust System HDSCA074853L Replacement Exhaust Manifolds Fit for 2004-2013 Cadillac Escalade 2004-2013 Chevrolet Suburban 1500 2005-2013 GMC Sierra 1500
2004-2013 Cadillac Escalade
2004-2013 Cadillac Escalade ESV
2004-2013 Cadillac Escalade EXT
2007-2013 Chevrolet Avalanche
2004-2006 Chevrolet Avalanche 1500
2004-2013 Chevrolet Silverado 1500
2005-2007 Chevrolet Silverado 1500 HD
2004-2013 Chevrolet Suburban 1500
2004-2013 Chevrolet Tahoe
2005-2013 GMC Sierra 1500
2004-2013 GMC Yukon
2004-2013 GMC Yukon XL 1500
1 Set Exhaust System(as shown in the picture above)
- FITMENT - Replacement Exhaust Manifold for 2004-2013 Cadillac Escalade/2004-2013 Cadillac Escalade ESV/2004-2013 Cadillac Escalade EXT/2007-2013 Chevrolet Avalanche /2004-2006 Chevrolet Avalanche 1500/2004-2013 Chevrolet Silverado 1500/2005-2007 Chevrolet Silverado 1500 HD/2004-2013 Chevrolet Suburban 1500/2004-2013 Chevrolet Tahoe/2005-2013 GMC Sierra 1500/2004-2013 GMC Yukon/2004-2013 GMC Yukon XL 1500 Compatible with HDSCA074853L Pipe
- EXHAUST MANIFOLD ADVANTAGE - Exhaust Manifold with stainless steel construction has strong anti-corrosive; stainless steel construction can protects against warping and/or cracking, leak-resistant for long-lasting performance
- IMPORTANT NOTE - Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold. A rigorous quality inspection has been undertaken to ensure it conforms to product standards. Please contact us if you have any question
- INCLUDING AND WARRANTY -1 x Header exhaust system,All necessary installation hardware,12 months warranty
- EXHAUST MANIFOLD PART NUMBER- HDSCA074853L
Universal O2 Sensor Spacer Adapter Isolator, CEL Fix Check Engine Light Eliminator Adapter Extender, for Exhaust Systems with M18 x 1.5 Sensor Holes (Pack of 2)
Universal 18mm x 1.5 thread pitch, Length: 46 millimeter.
Fits All vehicles and exhaust systems with M18 x 1.5 oxygen sensor holes.
For Usage Of Veichle Spark Plugs Spacer to eliminate check engine light.
This spacer only minimize the chance of CEL. Some vehicles will need their ECU reset if the CEL is triggered before hand. There is NO GUARANTEE that this product will work on your specific application. This kit allows for a proper and customizable installation position. Our oxygen sensor extender kit is machine TIG welded for a precise fit. The threads have been precision cut for a proper seal to prevent exhaust leaks and maintain proper sensor readings.
- Universal 18mm threaded socket, this Sensor Spacer Adapter Isolator is made from Mild Steel.
- Application: Fits All vehicles and exhaust systems with M18 x 1.5 oxygen sensor holes.
- Installation: Quick and Easy Installation with no modifications needed.
- Usage: This O2 sensor spacer adapter extension increases the distance between the O2 sensor and the exhaust system. For Usage Of Vehicle Spark Plugs Spacer to eliminate check engine light
- Service: 100 satisfaction guarantee, If you have any issues with the oxygen sensor spacer adapter extension, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
Black Path - Universal Fit Oxygen O2 Sensor Spacer Adapter Extender (1x) 90 Degree Angle CEL Fix Kit for Exhaust Systems with M18 x 1.5 Sensor Holes
BlackPath Racing // (1x) 90 Degree Angle Oxygen O2 Sensor Spacer Adapter Extender // Check Engine Light Fix for Exhaust Systems with M18 x 1.5 Sensor Holes
» All vehicles and exhaust systems with M18 x 1.5 oxygen sensor holes
» FOR OFF-ROAD AND RACING USE ONLY
» (1x) 90 Degree Angle Oxygen O2 Sensor Spacer Adapter Extender
BlackPath is proud to present this Oxygen Sensor Adapter CEL Fix Kit for vehicles and exhaust systems with M18 x 1.5 oxygen sensor holes. Customers who have a custom or aftermarket exhaust can often run into the situation of factory oxygen sensors having low clearance or fitment issues. This kit allows for a proper and customizable installation position. Our oxygen sensor extender kit is machine TIG welded for a precise fit. The threads have been precision cut for a proper seal to prevent exhaust leaks and maintain proper sensor readings.
Each product comes with a Lifetime Warranty and is backed by our 100 Satisfaction Guarantee. If you have any questions, please don't hesitate to contact us to speak with our friendly technical support team.
- Fits: All vehicles and exhaust systems with M18 x 1.5 oxygen sensor holes
- FOR OFF-ROAD AND RACING USE ONLY
- Includes (1x) 90 Degree Angle Oxygen O2 Sensor Spacer Adapter Extender
- Quick and easy installation to remove check engine light
- Backed by a Lifetime Warranty and our 100 Satisfaction Guarantee
- Cuba brown eau de toilette 1.17 oz spray
- Samsung galaxy note 101 16gb
- Turquoise jacket zipper
- Dorman 625-102 oil cooler line
- Leather punk bracelet spike